Let's see a few pictures of your ZX-12R and list out all the mods you've done to it too.

2000 ZX12...purchased it non-running about 3 years ago. Finally tore into engine and found piston rings were melted to the pistons. Purchased new cylinder, rings, and put engine back together. The starter seems to make a bit of a screeching sound when turning the engine over. The bike will...

What do You think about such thread? Ok I will be first: Titanium bleed niples for my 65mm brembo:

Noticed a drop of oil last weekend while out with MarkCBXX and slvr(Roy). Lots of ideas on the causes, but I believe it is the oil being pushed through the wiring insulation. This could very easily go unnoticed if it does not drip. What I would like for you guys to do is check your 12's and...

Since the thread is beling linked to often I am modifying my original post to correctly identify the parts needed. This will disrupt the flow of the thread but will show the proper items needed for this mod listed with the pics Here are the parts: 5" of 5/32" hose { inside diameter }, pilot...