Kawasaki World banner

clutch

  1. ZXR 750 H1 no power to the wheels when bike in gear

    ZX-7R
    I recently replaced inner clutch centre (I can say that it was a mission trying to get centre hub nut out with no clutch hold tool, eventually got it out by chucking a bunch of rags and using air gun) while removing nut there were occassions that both the inner spindle and basket was...
  2. Wont shift when racing will shift when riding normal

    General Discussion
    I have 2012 ZX10R just replaced clutches with OEM clutches but was doing this before. When riding normal it shifts fine. When I'm racing and start speed shifting gearbox heats up doesn't want to shift up or down feels like clutch isn't engaging. If I tighten the clutch cable it will shift I...
  3. clutch slipping in 1st gear 2015 zx-6r

    ZX-6R
    Feels like my clutch is occassionally slipping in 1st gear. Not sure if this is traction control kicking in or if its actually slipping though. Was riding with my wife on the back yesterday, and at one point it was really loud and vibrated like it was gears slipping. Seems to happen more...
  4. Clunking sound

    ZX-9R
    Hi, My ZX9R (C1, 1998) has developed a clunking sound whenever I change throttle position (i.e. when I go to accelerate and when I slow down). The sound is similar to the clunk when I engage 1st from neutral. I'm hoping this is just the clutch plates needing changing, but before I go and open...
  5. My Bike is Jerky in Shifting in the Lower 3 Gears on VN200

    Vulcan
    I have 30K on the Bike I have Had it for over 2 Years. The last 200 miles the Bike is very Jerky in the shift if i get on the throttle. After the 4-5 gears it settles down. Thinks I have replaced so Far new fiber clutches New oil (10-w 40) New Clutch Cable Cleaned the Steel Plates ( Used 800...
  6. Help!!!!!!!

    ZX-12R
    I am the proud owner of 2 kawasaki ninja zx12's (2000) I am having a issue with my clutches. I just replaced the fibers and springs. in exact order they came out. I was very careful about this. once all was put back together the bike turned on fine. but as soon as I put it in first it jumped...
  7. In search of OEM clutch cover for the 12

    ZX-12R
    Good day all. I'm brand spanking new to the forum but I regularly frequent the treads for a number of helpful tips. But this time I'm the one that needs help. I need an OEM clutch cover for my 12. I know I know... Ronayers... Lookin to see if anyone as a good used one. Thanks guys.
  8. Irritating clutch problems

    ZX-12R
    I ride a 2001 ZX12r that I bought 3 years ago and I just recently had 2 send it to the shop for work on the clutch. It would still pull while holding the clutch and would not come out of gear due to this if I was stopped. The shop put new clutches in but it still doesn't fully disengage when...
  9. 2000 zx12 bad vibration, not the normal 4.5k vibration.

    ZX-12R
    Hi guys, I had the 12 out today and was coming home from a 100 mile ride today and before I got home started horsing around. I dropped the clutch and heard a slight pop and then a very strange vibration from the engine! Engine still runs perfect, with no abnormal noise or smoke. It's not related...
  10. Minor 12r issues

    ZX-12R
    Hey all, im new to the forum so i thought i might as well start with a small intro. Im Jake, ride a '00 zx12r & '00 zr7 have to sell the 7 soon tho =( sad times.. ive had the 12 for a while now & find it to be a great bike, the bloke who owned it before me put a set of cams in her & i put a...
  11. Moly in Oil...

    ZX-12R
    Ok I am putting on my flame suit as I post this but I have been conducting a super secret test for the past two or so years or so and I figure no sense keeping it to myself any longer. I can't guarantee anything about it other than I never had to change the clutch or motor in either of my bikes...
Top