Kawasaki World banner

1 - 7 of 7 Posts

·
Site Admin
Joined
·
486 Posts
Discussion Starter #1
2011 Kawasaki Ninja 1000 Pictures and Information










































Key Features
- 1,043cc inline-four with DFI® offers serious torque
- Lightweight aluminum frame is narrow and tuned to transmit optimal feedback to the rider
- Fully adjustable inverted front fork has settings designed for sporty performance and ride quality
- Placement of horizontal back-link rear suspension contributes to mass centralization
- Radial-mounted front brake calipers combine with the radial-pump front brake master cylinder to offer superb control and feel
- Sleek, supersport styling gives the Ninja® 1000 a distinctive look
- Relaxed, upright riding position contributes to all-day comfort
- Larger fuel capacity offers substantial range
- Windscreen is adjustable to three positions, allowing for optimum wind and weather protection

DOHC, 16-valve, 1,043cc Engine
- Liquid-cooled inline-four offers true open-class power from idle to redline, making it easy to harness for experts and novices alike
- Bore and stroke dimensions of 77.0 x 56.0mm offer an ideal balance of peak power and low- and mid-range flexibility
- 38mm Keihin throttle bodies cram the air/fuel mixture directly into combustion chambers via downdraft intakes for maximum power
- Oval sub-throttles help keep the engine slim, and a slim midsection allows an ideal bike/rider interface for maximum comfort and control
- Engine’s rev limiter comes into play “softly,” providing usable overrev character since power doesn’t drop off suddenly at high rpm
- The engine’s relatively low crankshaft position allows a moderately long stroke without adding engine height
- A secondary engine balancer, driven off a gear on the sixth web of the crankshaft, eliminates excess vibration and contributes to rider comfort

Cool Air System
- Intake system routes cool air to the airbox via ducts in the fairing, minimizing performance loss due to heated intake air
- Duct positioning – close to the rider – allows the intake howl to be heard and enjoyed
- Airbox resonator reduces noise at low rpm and enhances intake sound at higher revs

Exhaust System
- The exhaust system features a 4-into-2-pre-chamber-into-2 layout. Silencer end-caps maintain the quad-style image
- Main and pre-catalyzers ensure cleaner emissions
- Thanks to the under-engine pre-chamber, silencer volume is reduced, and silencer weight is low. Exhaust system offers excellent mass centralization and contributes to a low center of gravity

Slim-type Fuel Pump
- Slim-type fuel pump features an integral fuel gauge
- Fuel tank design and slim-type fuel pump minimizes dead volume inside the tank; fuel capacity is 4.0 gallons

Bodywork
- Supersport-style full-fairing bodywork gives the Ninja 1000 a distinctive, head-turning look, and also offers plenty of wind and weather protection for short-tour ability
- The fairing’s slat-style leading edges direct wind around the bike, allowing the fairing to be narrower at the middle
- The fairing flares at the rear, keeping hot engine air from hitting the rider’s legs
- Original design front turn signals are integrated into the fairing and are attached to the inside of the fairing with rubber mounts that minimize damage if the bike falls over
- ZX-6R-spec front fender contributes to excellent aerodynamics and racy looks
- Slim and compact tail cowl moves mass physically and visually toward the front of the bike
- LED taillight features red LED bulbs and a red transparent lens
- Slim rear fender gives the bike a light-looking rear end
- Windscreen is manually adjustable for optimum wind/weather protection
- Windscreen has three available positions spanning approximately 20 degrees and ranging from sporty to maximum wind protection. Adjustment can be done by hand (no tools required) by depressing the release button below the instrument panel. Windscreen adjustment should always be done with the bike stopped

Aluminum Backbone Frame
- Aluminum backbone frame is similar in concept to the Ninja ZX-10R’s, and helps make the bike narrow and easy to grip with the knees for maximum rider comfort and feedback
- The frame is lightweight and highly rigid, and uses the engine as a stressed member for solid handling and optimum stability
- Frame elements are tuned to transmit optimal engine feedback to the rider
- The frame’s five-piece construction consists of steering stem, left and right main frames, and two cross pieces. The two main frame components have open C-shaped cross sections
- Welds were eliminated wherever possible for simplicity and appearance; the frame beams and swingarm brackets are single die-cast pieces
- The new frame uses four engine mounts, three of which are rigid, one of which (the upper rear crankcase mount) is rubber
- Rear subframe is a three-piece aluminum die-casting assembly that’s light, strong and optimizes mass centralization
- The sub-frame is an example of form and function combined, negating the need for side covers and allowing underseat narrowness for a shorter reach to the ground

Horizontal Back-Link Rear Suspension
- All-new rear suspension design positions the shock unit and linkage above the swingarm where it’s less exposed to exhaust heat and contributes to mass centralization
- Visible from the outside, the horizontal monoshock contributes to the Ninja 1000’s ultra-sporty appearance
- Linkage characteristics are the same as those of a standard Uni-Trak® system: Wheel movement versus shock stroke is the same ratio
- The shock features stepless rebound damping and spring preload adjustability for a custom-tuned ride

Fully Adjustable 41mm Fork
- The Ninja 1000’s inverted fork is adjustable for compression damping, rebound damping and spring preload – and is protected from harm by a cool-looking shroud
- Settings are designed for both sporty performance and ride quality
- Separate, raised handlebars contribute to the sporty, comfortable riding position; bar stays are mounted to the fork tube tops, which extend above the top clamp
- A thick urethane seat provides a high level of rider and passenger comfort
- Tapered-type grips, like those used on supersport models, offer a more direct feel
- Ninja ZX-10R-style footpegs with knurled surfaces offer good grip, direct feel and control, and no-nonsense looks
- The passenger footpeg brackets incorporate convenient luggage hooks

Brakes
- 300mm front petal-type brake discs are gripped by opposed four-piston radial-mount calipers. (Caliper piston size is 4x30 mm)
- A radial-pump front brake master cylinder contributes to the superb control and feel offered by these high-end calipers
- The rear brake is a single piston, pin-slide caliper gripping a 250mm petal-type disc. The caliper is mounted below the swingarm, and located by a torque rod

Large-Volume Fuel Tank
- Five-gallon (19L) fuel tank offers substantial range
- Steel construction facilitates use of magnetic tank bag
- Tank shape (flared edges and a trim shape at the back) allows riders to easily grip tank with their knees

Instrumentation
- Sporty instrument panel features a large analog tachometer and multi-function LCD screen. It’s a design based on the ZX-6R’s unit, but which features original graphics and coloring
- Functions include speedometer, tachometer, fuel gauge, odometer, clock, dual trip meters and warning lamps
- Hazard switch located on left bar pod

Specifications
Engine: Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four
Displacement: 1,043cc
Bore x stroke: 77.0 x 56.0mm
Compression ratio: 11.8:1
Fuel injection: DFI® with four 38mm Keihin throttle bodies, oval sub-throttles
Ignition: TCBI with digital advance
Transmission: Six-speed
Final drive: X-ring chain
Rake / trail: 24.5 degrees / 4.0 in.
Frame type: Aluminum Backbone
Front tire: 120/70 ZR17
Rear tire: 190/50 ZR17
Wheelbase: 56.9 in.
Front suspension / wheel travel: 41 mm inverted cartridge fork with stepless compression and rebound damping, adjustable spring preload / 4.7 in.
Rear suspension / wheel travel: Horizontal monoshock with stepless rebound damping, adjustable spring preload / 5.4 in.
Front brakes: Dual 300mm petal-type rotors with radial-mount four-piston calipers
Rear brake: Single 250mm petal-type rotor with single-piston caliper
Overall length: 82.9 in.
Overall width: 31.1 in.
Overall height: 48.4 in.
Seat height: 32.3 in.
Curb weight: 502.7 lbs.
Fuel capacity: 5.0 gal.
Color choices: Ebony, Candy Fire Red / Ebony
Warranty: 12 Months
 

·
Registered
Joined
·
1,426 Posts
It looks like it would look good with all the typical stuff done to it. I hate new bikes with all the reflectors, goofy blinkers, mudflaps, etc.
 

·
Registered
Joined
·
1,943 Posts
Sold! Once again, it says, "Serious Torque!" WATTie could do to that body. That muffler is your torque package. TCBI digital ignition...:eek:hno: :evil:
 

·
Registered
Joined
·
2,916 Posts
2 things I can't deal with this bike.....1, exhaust, what is up with copying European design :headscratch:.....2, ram air position, just imagine if this bike has snorkel like ZX12R :eek:hno: this baby will gain more HP and fly....probably 210HP......I'm just sayinnnnnn...........
 
1 - 7 of 7 Posts
Top