Kawasaki World banner

About to install block off plates

7393 Views 13 Replies 8 Participants Last post by  Alejandro
I got hold of some block off plates to help with more acurate tuning and to try and stop all the back firing. I want to remove the pump and and all the crap that comes with it.

Any advice on how to plug the holes that will be left when the hoses are removed and also is there anything els i need to do? I've heaard about people needing to mod the crank case, is this right?
1 - 1 of 14 Posts
Maybe the UK has something different but the my 02 didn't require any resister to remove the air valve switch (which most call the pump).

I plugged off the vacuum line going to the throttle bodies and found a plug that fir the airbox.

as above same thing :thumbup:
1 - 1 of 14 Posts