[Jasehsv12]

Hi I am currently building my Zx12r in to a street fighter and have installed a acewell ACE-7000 series dash and am having trouble setting up the speed/ pulse settings, I have worked out the fuel level and temp but am stumped on the speed.
these are the instructions from acewell.
Can any one give me some guidance

 

[Jasehsv12]

Sorry about the attachment photo. First time poster.

 

[tomonever]

Well I used to have Acewell dash also and I have a bit issue with speed sensor ALSO
I mounted magnet on brake disc and did small bracket on front fork.
You can try to connect sensor to OEM speedometer.

 

[Jasehsv12]

I have it connected to the speed pulse and power wires from the original harnes but can not get the settings right.

 

[tomonever]

I have it connected to the speed pulse and power wires from the original harnes but can not get the settings right.

I had same problem, speed was wrong, I did all good and then ask a friend to ride with me along and I was checking readings on his stock speedometer...
Actually to be honest it is play at random choices.