So I've never owned a Kawi before but I acquired the zx12r for free so why not its been a complete rebuild frame up but I got to the clutch and now I wanna pull what little hair I have left out everything in the clutch basket is new the narrow friction plate went in first then steels cut side facing fictions new gasket got it all back together and no clutch pulled it apart checked a few things still nothing. I have lever but it's not engaging if I put it in first and pull the clutch it doesn't give me the neutral roll I was told the pressure plate is specific but I don't remember how it came off please help before I go bald
Hi all, I'm not syncing my injectors but I've attached a vacuunm gauge to the end vacuum pipe & it's coming out at about 7 -8 HG
I think it should be up near 17 - 18 HG? I'm taking the reading from here,,,,,
Thanks for any help.
Seeing that i am completely rewiring my 12, and thinking about the charging system issues that plague these poor bikes, i searched on here and around the net and found that people have successfully used FH mosfet regulators.
I am familiar with these because i systematically upgraded all my...
Hi all, I recently purchased a persimmon red ZX12R and have spent the past few weeks getting it how I want it, still got a long way to go, planning to turn it into a sort of semi drag spec street racer. Anyway...I have just fitted an LED tail light that I purchased off eBay, supposedly a direct...
On the 2000 A1 models, was the factory cooling fan aluminum blades or plastic blades? I have seen posts about a Muzzy aluminum blade fan upgrade. I think the 02-05 were plastic, but curious if the A1 came with a aluminum blades from the factory.
Hi all. Are there any other fan switches which fit the A1 radiator or does anyone know the thread size?. Mine has gone open circuit so needs replacing. i will be fitting a manual switch in parallel as well ( want both just to be safe)