99 ninja 6r...had carb issues so i had a new exhaust installed along with new set of carbs...exhaust got installed no probs...when the carbs finally got installed a yr later a new problem occured...new carbs installed now there is no spark at the plugs...any ideas???
Bad mechanic or real prob??
1 - 4 of 4 Posts
Joined
·
330 Posts
It could be the igniter too.
Joined
·
1,597 Posts
With a multimeter do a resistance check through the engine kill switch, it should be the same resistance as the meter probes shorted together, maybe +0.1 Ohms. If it's not then strip and clean.
The primary stick coil winding is about 1 Ohm, so if there is any resistance in the engine kill switch, most, or all the battery voltage will be dropped through it, leaving nothing for the coil to generate a spark with.
The primary stick coil winding is about 1 Ohm, so if there is any resistance in the engine kill switch, most, or all the battery voltage will be dropped through it, leaving nothing for the coil to generate a spark with.
1 - 4 of 4 Posts
