Kawasaki World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
503 Posts
Discussion Starter #1
I decided to change the fork oil during the winter, and having no impact gun but access to a CNC I thought I would make up a spring compressor for the ZX12. I now need to make up a hollow wrench to hold the inside whilst undoing the Allen bolt at the bottom of the forks. Anyone got one? If so some pics and dimensions would be useful. :thumbup:

[/URL][/IMG]


[/URL][/IMG]

[/URL][/IMG]


[/URL][/IMG


When I'm done, should anyone wish to borrow the tools, you are most welcome.
Dave:thumbup:
 

·
Registered
Joined
·
239 Posts
You don't need to strip down the fork to change the oil, just undo the top cap, pour out the oil, pump the damper a few times, pour out the oil, etc etc until no more oil comes out, then re-fill with either the same amount of fresh oil that came out, or the amount specified in the manual for an oil change, whatever is your preference.
 
1 - 3 of 3 Posts
Top