Kawasaki World banner

1 - 3 of 3 Posts

·
Registered
Joined
·
182 Posts
Discussion Starter #1
We run zx12 engines in our dirt cars. On the dyno today and loved the numbers stock, but put the pcIIIr on and the numbers are not as good. We tried about 4 different maps supplied with the pc. Does this thing work or not?? We run aftermarket exhaust and custom built air box with K&N. Any ideas would be appreciated.

Thanks, Bryan
 
G

·
Guest
Joined
·
0 Posts
Your gonna need to take a look at the A/F ratio, and then start playing
with the button's. :D

It work's quiet well when tuned correctly.
 

·
Registered
Joined
·
191 Posts
You definitely need to have it mapped with the air fuel monitored. Should see improvement. I can only speculate that part of the issues here could be the air box etc.

I would suggest you try getting a hold of Doug Meyer at Muzzys because theya re pretty involved with ZX12 powered race cars these days. Doug can probably hook you up pretty close. He even moderates a board on ZX12 powered cars.
 
1 - 3 of 3 Posts
Top