Kawasaki World banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1,664 Posts
Discussion Starter #1
I have own the 2000 paper manual since new.My new 2003 engine has a few different plugs .It has 2 fan plugs so i`ll tape up 1 of them.The radiator 2 wire temp plug is totally different. There is a white / clear 3 pin connector that is not on the old engine harness at all that i need to know what it is.....I know electronics. All I need is this section on the wiring schematic and the wiring routing diagram in this area of the engine..Thanks for any help.I have the new engine converted and mounted.
 

·
Registered
Joined
·
1,489 Posts


That's a quick screen shot of part of page 598. For B2H 2003 model.
I don't have software at home to save the PDF page. You could probably download the whole manual faster than I can do it with this poxy laptop.
I can't see any useful illustration, but if I see one I'll stick it on here.

3 wires feeding the top right corner...
BL goes to the coil of fan relay
The other two are fused supplies fed from the fan relay contact.
 

·
Registered
Joined
·
1,664 Posts
Discussion Starter #4
thank you guys very much. I should be able to sort it out........I`ll be posting some pics and text on the whole conversion after it runs and am done.......
 
1 - 4 of 4 Posts
Top