Kawasaki World banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
i have a 2007 zzr600 with about 2980 miles on it. when i got the bike it didnt run. I worked the carbs and it runs great but, now it leaks oil through two small holes in the block. one is on the left top side and the other in the front center of the block.

this must have been a problem with the previous owner and my suspicion is that some inner seal is either failed or the oil is not circulating causing high oil pressure and thus the leak through these outlet holes. any ideas on what to try to resolve this or does this mean taking apart the engine just to replace some minor inner seal?

any ideas are appreciated.

Ray - [email protected]
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.