Kawasaki World banner

1 - 7 of 7 Posts

·
Registered
Joined
·
222 Posts
Discussion Starter #1
positive..... It doesn't work in the tank either. I think there is an extra notch on the key for the tank and tail or something. I am going to take it to a different locksmith on monday and see what he says.

</p>
 
G

·
Guest
Joined
·
0 Posts
best take the tail lock in the locksmith. Something similar happened to me with a zx-7r. good luck!!!!!!!!!

</p>
 
G

·
Guest
Joined
·
0 Posts
You could probably just hit it with a wire brush and

wear the sharpness off the edge's. It should work

after that.

</p>
 

·
Registered
Joined
·
222 Posts
Discussion Starter #4
I recieved my bike from the salvage company without any keys. Well i took my ignition to a locksmith and he made me a set for it. It works in the ignition fine but not in the tank and trunk. There is only one key right????



Thanks....

beau

</p>
 

·
Registered
Joined
·
116 Posts
Yep, just one!



Are you sure the lock or seat/cowling isn't jammed from the crash?

</p>Edited by: <A HREF=http://pub56.ezboard.com/uspeednuts.showPublicProfile?language=EN>Speednuts</A> at: 1/13/02 12:52:12 pm
 

·
Registered
Joined
·
759 Posts
Do what some of the other guys recomended, if it doesnt work then it Could be they just put another ignition cylinder in from some other bike!!!



Take out the tail cylinder and bring that to the locksmith and make another key!!!





CrotchRocket

" I just live my life a 1/4 mile at a time "</p>
 
1 - 7 of 7 Posts
Top