Kawasaki World banner

1 - 7 of 7 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Buzzing starts at around 5000rpm. grab the windshield and it stops. the other buss comes on around 4000rpm from the upper right fairing.... It's driving me nuts and I have tightened everything down....

</p>
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
The small covers on the upper right & left have 1 screw combined with a pop in tab. The lower part needs some felt or rubber to cushion that area.

Did mine yesterday...No big deal. Look for the adhesive type felt.

</p>
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #4
The two small sections on each side that you can swingout to gain access to the lights.

</p>
 

·
Registered
Joined
·
327 Posts
Farmboy is correct. The two side panel's. Need to install some felt where panel's mate to one another. Or get a louder pipe<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/laugh.gif ALT=":lol">

If Jessie Jame's had a ZX12R I'd ride with him.

</p>
 

·
Registered
Joined
·
327 Posts
Check your local sporting good store and ask for moleskin. It's a felt like materal with awsome tape on backing. I use the stuff on my bow,

If Jessie Jame's had a ZX12R I'd ride with him.

</p>
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #7
Thanks Guys, I spoke to the dealer about the windscreen buzzing and we are going to install a couple more screws in the screen just below the middle section to get rid of the buzzing there. Combined with your ideas for the panels, that should clear the noise...

</p>
 
1 - 7 of 7 Posts
Top