Kawasaki World banner

1 - 9 of 9 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi everone im new to this site, looking for some help please

what socket do i need to remove the head bolts??

Cheers Bob
 

·
Registered
Joined
·
840 Posts
Welcome to the site mate.


Once the top cover is off and you have the cams out the way its a 14MM socket with around 10 - 12 long bolts holding the head on to the block - You will also need a selection of other size sockets and allen keys etc to remove.

Read the manual as above

Any pics?

Mike
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4
Hi Guys

Thanks for the replys, but the head bolts arent Hex bolts they look more like Torx bolts but with way more splines iv never seem anything like them before
 

·
Registered
Joined
·
238 Posts
Wow good luck Ken... just looked at the entry list ... and a shed load of bugly's on there..LOL

12R power all the way... :crazyloco:

Colin
The entry list is for the ACU classes and is over 70 now.
I run in the 9.1 class with Straightliners which is normally one of two ZZr1400s winning with either hitting the index but I will be happy with anything under 9.5 on my normally aspirated bike,turbo is all prepped for the last top speed meeting the week after. :thumbup:
If anybody wants to follow the event they have excellent coverage and video live from trackside both days here
http://www.eurodragster.com/santapod/live/2013extremeperformancebikeweekend/default.asp
 
1 - 9 of 9 Posts
Top