2007 zx10r - speedometer reads "0" all the time
Hello ZX10r Riders...I recently purchased a 2007 ZX10R and the speedometer stays at "0". The prior owner had a Gear Indicator installed. The diagnostic code is 24. I did investigate and the gear indicator had a wire that was hard-wired to the ignition fuse in the fuse box. Once I pulled that wire, the gear indicator was disabled and the "FI" light actually went away. I did leave the white connector under the tank on the left side connected tho. I took the bike for a ride and the speedo would actually register a mph but it would jump around. I happened to look down after a few miles and discovered that the mph was back at "0".
So, I disconnected the total gear indicator from the plugs underneath the tank and plugged the connectors from the actual wiring harness together. This still doesn't remove the code and blinking FI light.
Any help would be greatly appreciated.
**update** problem solved!
Last edited by stunna; 07-03-2018 at 04:35 PM.