Kawasaki World banner

00-03 ZX12R PCV +AutoTune +Muzzy Exhaust

8.3K views 16 replies 5 participants last post by  maxumis  
#1 ·
After riding a 2012 Ninja 1000, I'm hooked. To fund the purchase, I need to sell my 12. I know if I put it up on CL, no one would appreciate what I've done with the exhaust so I'm going to buy a stock system and offer my full system here to you guys. So here's what you get:

*Full muzzy stainless system in good shape. The can is titanium and there's a small scratch on it. I'll have pictures up soon.

*Power Commander V wired to plug right in to your bike. It uses the FI connectors just like the PC3, the only difference is I wired it to draw power from the tail light assembly rather than the rear brake switch.

*Auto-tune (It's actually the WideBand2 box) with O2 sensor welded in to the mid-pipe in such a way that the cable routes between the swing arm and right heel guard. Plenty of clearance and it makes for an almost factory clean look.

You'll also get the map that's on the PCV which enables autotune at a certain engine temperature and autotunes per gear based on speed sensor input.

I'm thinking $1300 for the whole setup but that's based on ebay pricing and the time I spent modding it to work on the 12. The price is negotiable.

Again, this is plug-and-play and I'll provide support if you need help installing it or setting it up.
 
#4 ·
Sorry for the late reply.

Check out pictures here

I will have better pictures of the actual PCV connection tomorrow. I soldered and put heat-shrink tubing on all connections. It's worked great ever since I installed it back in March or April.

I wanted everything to be easily removed from the bike in case I wanted to sell it off. The only connections using splices are where I tapped in to the speed sensor signal and the water temperature sensor signal for the AT functions in the PCV.
 
#11 ·
I can sell you my mint stock headers and a mint D&D Can (pc'd white) for 100 shipped!
 
#16 ·
Sale pending on the PCV. The wideband2 and full muzzy are still up for grabs.

Come to find out thanks to almost_les that the wideband2 box is a standalone box. You don't need a PCV to run it so you can pull AFR data with it.