[junglepeanut]

I am installing my rc wheels and I need to know if th esotck spacers are insertedd or I did not get spacers. Because without them it really loks like the cushdrive will rub hard and the part that mates to the rear claiper will float around.
But I cant get the stock spacers to fit on with it in any way.

Help please

 

[EPSTEIN]

I would call RC or contact their website.......ever set of aftermarket wheels I have seen use stock spacers.....

 

[tdk12r]

JP, I used the stock spacers and dust covers off of my stock wheels on my RCs. They don't come with them from RC.

 

[junglepeanut]

What are the dust covers, TDK12r?


Thanks Epstein After your post I ran back outside and stared at it and poof got it on will explain later. (If I dont leave now I will be late for school.)

 

[tdk12r]

They go over the bearings and the spacers fit in them. They are actually called oil seals on the Kawi site. Look them up on the Kawi site on the parts diagram for rear wheel. You will see what I am trying to explain.

 

[junglepeanut]

Thanks. Working on it now.

 

[oldkawboy]

JP,
If you are planning on drag racing your bike, I would recommend installing a second bearing in the cush drive to distribute the torque stress.
I just performed this mod (thanks to Turboblew) and it makes sense to me.
Dan

 

[junglepeanut]

Imight go to the strip once or twice a year. But if it well help the bike last longer and isnt to expensive I willl add it anyways, what does it involve?

 

[BIGRED12R]

junglepeanut...Did you get your gauges yet???

Doug

 

[junglepeanut]

Just got them. They look great. I want everything to be perfect, so I went to radio shack and Home depot but they did not have what i was looking for. (Those of you who buy these they come with everything you need to do the hook up.) I just want to set up all the wires with proper female and male connection not just a twist together cap beecause I ride alot in the rain and dont know enough about electronics to troubleshoot on my own if i mess up. With color matched connections I dont think I can mess up.

Oh and I have not looked at a schematic yet, but where is the marker light wire to hook up to? I was just going to tap/splice the front tiny triangle light is this right or wrong.? Thanks.