[TheRocker]

well i figuerd out how to post pics and took some with my iphone

theres is a lot of work to do (A LOT) but i'm ready

the bike originally was stolen and crashed and i took it from the guy that tried to build it

it has about 20,000 km on the motor, clutch was done about 1K ago
chain and sprockets ( -1 front) about 400K ago

still original air filters (have to change) and plugs

valves were adjusted 3k ago

the ECU was alterd and has a diffrent map in it according to the guy that explaind where to plug in (ECU pic)

tail was sawed off, the entire front fork is a 2006 model.
NO PIPE original will be put on later and then replaced with a slip on for noise.

 

[TheRocker]

no pipe...

 

[TheRocker]

NO Tail

 

[TheRocker]

ecu...

 

[TheRocker]

WHAT IS THAT THING WITH THE RIBS BENETH THE ecu ?

 

[TheRocker]

1. original exhaust will be welded
2. oil and filters and hoses
3. frame sliders
4. new tail piece (a lot smaller) with a small passenger seat.
5. new tank cover with gauges in.
6.front head lamp (dual maybe or a dirt bike mask)

 

[silver0012r]

thing with ribs is the recifier, someone correct me if im wrong.looks like a interesting project mate, will you be getting a new subframe?
good luck with your build man

 

[shiphteey]

What do you plan on doing about the lack of a ram air system? Having run my 12 with the tubes disconnected I can tell you it will be dog slow over 100 mph.

 

[Warp12]

What do you plan on doing about the lack of a ram air system? Having run my 12 with the tubes disconnected I can tell you it will be dog slow over 100 mph.

For normal riding, it should be fine. I still recall your bike going 118 mph in the 1/8th without those tubes attached...

 

[TheRocker]

well to answer your questions first of all i will be wotking with this sub frame, a little bend and weld and it will be great for a small seat for me and a tiny one for a hopfully a nice looking blond form the pub

about the ram air, i will build two plastic covers that will spread a bit and will be angeled twords the front to it will get more air
currently i runs great over 100mph and also at speeds like 160 (didnt try it faster due to rain and bad wheather right now) and also its naked and the wind is not my friend..

guys is it possible to take the spark plugs out without the zx12 bendi tool ? (dont have it and its expensive to order to israel

 

[TheRocker]

Also i'm going to go with a 190 rear tire for cornering probably..

 

[drp]

Also i'm going to go with a 190 rear tire for cornering probably..

.


defiantly a 190 rear for cornering, ditch the 200


.

 

[maxumis]

just wandering if you have weighed the bike yet?

 

[TheRocker]

Nop, dont have an idea on how to do that..

 

[shiphteey]

Nop, dont have an idea on how to do that..

Seesaw, thats how Shane knows how much his 14 weighs.

 

[JayZX12R]

You can get two 350 lbs scales and 1 smaller scale, and put one under each tire, and one under the kick stand. Add all three weights together, and you have your total weight.

 

[Barbarian-CBX]

I use my 12 to do arm curls. Judging from that I'd say my 12 weights between four and five hundred pounds.

 

[smiffy]

blond form the pub

Wow, you have pubs in israel?

 

[JayZX12R]

Wow, you have pubs in israel?

People from Israel drink can drink. It is the Muslim middle east that has drinking restrictions.

 

[smiffy]

People from Israel drink can drink. It is the Muslim middle east that has drinking restrictions.

Well I wern't sure about the drinking? But I just thought it was us Brits that called them "Pubs"?